928 Jaymor Road
Suite C-200 
Southampton, PA 18966 USA

 Phone: +1-215-322-9670
  Fax: +1-215-322-3905
 info@tufftemp.com

Cost-Effective and Completely Non-Marking. An Excellent Replacement to Carbon / Graphite

TRANSFER ARM & WALKING BEAM PADS

Although Transfer Arms and Walking Beams do not typically see temperatures or abrasion as great as that seen on the Run Out Table, the process is still highly dynamic in nature and it requires a material with a high degree of temperature resistance, abrasion resistance and cushioning. TUFF TEMP Transfer Arm Pads and Walking Beam Pads are ideally suited for this purpose.

TUFF TEMP 2-ply, nominal 1/4" (6 mm) thick and nominal 3/8" (9 mm) thick 100% Kevlar belting, Wear Gard or Wear Gard Plus treated, provide outstanding durability and wear life for your handling system. Higher thickness, multiple ply pads are available if needed, although they are not often required for this area of you process. All pads can be fabricated to your specific width and length requirements, up to a 24" (610 mm) width maximum, with no defined limitation on length.

It is our pleasure to supply you with No Charge product samples for head to head comparison testing. This is the best way for us to prove our value to you, and we welcome the opportunity to do so!

Proud Member of the
Aluminum Extruders Council